Description
Sumetech BN coatings is high Boron Nitride concentration such that it can be diluted (such as a 1:1-6 water) .It can be brushing or pressurized-air-spraying. It can be applied to any substrate ( metal, ceramic, or graphite).
It can be applied in these industry:
Aluminum, titanium, cooper casting industry
Glass industry
Aluminum extrusion industry
Metal forging industry
High temperature equipment
Heat pipe production
Method of Use
1. Diluted with distilled water before use, with different objects, requirements of dilution ratio are also different. Dilution ratio: BN:water=1:1-6, customers can be adjusted according to the requirement.
2. After dilution, mixing evenly, clean the protected material surface. With sponge (brush, spray gun) will dilute boron nitride coating coated on the material surface.
3. After finishing the coating, drying under 300° C, can be used after drying.
Note: The coating should be uniform, do not make the BN in surface aggregation, which do not apply too thick.
Product Advantage
1. Good high temperature stability, and non sticking molten metal.
2. Non-toxic, no smell, no pollution.
3. Special formula, water solubility, completely soluble in water, easy to use.
4. High temperature resistance, high lubricity, corrosion resistance.
5. Can be coated on the hot or cold surface of protected material, after drying can be used dry soft cloth or paper processing, smoothing and polishing.
BN boron nitride coating, aluminum castings coating and die casting release coatings for casting materials